Lilac ribbon forms a repeated border across the lower front of this pointed black bouquet shell. The maker shapes the empty wrap first, punches its front edge, then threads the ribbon through the holes. A separate bow sits at the gathered base, with a smaller ribbon detail at an upper corner. The demonstration uses a prepared support; no flowers are arranged.
Open the original Reel on Instagram
0:04–1:04 · Establish the lining and pointed shell
Textured dark inner sheets are gathered around the support. Black outer paper is divided into larger and smaller sections. The larger pieces are trimmed and brought around the lined form, leaving upper corners at different heights.
Near 0:58, a front-facing half-sheet is positioned and pressed inward. The following upright view shows the pointed upper outline. Keep this panel distinct from the smaller lower front piece introduced next; the complete preparation of the internal support is not shown.
1:04–1:28 · Fit the lower front before adding ribbon
The smaller black section is worked around the lower part of the shell and gathered near the grip. Its curved upper edge leaves the taller black panels visible behind it. Lilac ribbon is then tied around the gathered base.
For your own paper trial, compare the front edge with the higher points before fixing its position. That edge will carry the lacing, so include its visible curve in your sample rather than planning the ribbon only against a flat sheet.
1:28–1:36 · Punch the row in the formed front panel
With the shell upright, the presenter uses a hand punch along the upper edge of the lower front panel. A row of small holes becomes visible across that edge. This preparation is shown here, unlike our white-shell lacing reference, which begins with an existing hole row.
The footage supplies no measured hole spacing, edge margin or verified paper strength. On a spare sample of your own material, check the hole pattern and chosen ribbon together before committing to the finished wrap. Match the trial to your intended curve and finish.
1:36–1:56 · Follow the ribbon through successive holes
The ribbon passes through the hole row progressively, leaving repeated lilac loops against the black front. The presenter handles the loose length while advancing along the edge and finishes with a bow toward one side.
Compare the exposed loops and the paper edge as separate details. Use your trial to assess the appearance of the ribbon width and loop size; the video does not establish a universal tension or a load-bearing function for this decorative border.
1:56–2:04 · Keep the three ribbon details separate
A small bow is added at the upper corner, and the completed empty shell is shown upright. Compare that small upper detail with the laced front and the larger bow at the base. These occupy different parts of the silhouette; none supplies a flower-arranging recipe.
Request paper and ribbon for a punching trial
Describe your planned shell size, black shade, lilac ribbon width and desired visible loops. Ask for material specifications and samples; the exact paper composition, ribbon fibre and product identity are not established by appearance.
Ask about wrapping paper and lacing ribbon
Choose “Other”. The optional note below can be copied into your inquiry.
Copy an optional lacing materials inquiry
Pointed Black Bouquet Shell: Punching and Lacing the Front Edge. https://fafaflower.com/pointed-black-bouquet-shell-punching-lilac-ribbon-lacing/ Black wrapping and lilac ribbon for a decorative punched-edge trial on our own shell. Intended shell and sheet sizes: [details]. Ribbon width, colour and visible loop size: [details]. Quantity and destination: [details]. Please confirm material specifications, pack sizes and samples.
Reference demonstration: 栀几花艺. Wrapping observations by FAFAFLOWER.
