Build an empty bouquet shell with a pointed patterned lining, a purple floral-print back and black outer layers that roll and fold around the grip. The demonstration uses a form without inserting flowers, so this lesson follows the paper construction rather than flower preparation.
Compare the height of the printed back with the lower rolled sides. Work against your own form and check the overlap before trimming; the footage does not give a measured cutting template.
Watch the demonstration Request materials for this look
Watch the full demonstration
If the player is unavailable in your browser, watch the same full demonstration on YouTube. It is also available on Instagram.
Materials visible in the demonstration
- Black-and-white patterned lining for the pointed inner sections
- A purple floral-print sheet for the tall back
- Black wrapping sheets for the back, rolled sides and folded front
- Black finishing ribbon, a practice form and suitable cutting and fastening tools
Follow the visible stages
00:00–00:04 · Preview the finished black bouquet shell
Compare the tall printed back with the opening between the black side rolls. This finished view is a shape reference for the construction that follows; it is an empty shell, not a completed flower arrangement.
00:04–00:14 · Fold the patterned liner into pointed sections
The maker folds the patterned inner material into points and brings them around the form. Watch how much of each point remains exposed rather than assuming a fixed fold depth or sheet count.
00:14–00:32 · Open the purple printed back panel around the form
The purple floral-print panel is folded and opened to form a broad back behind the lining. Compare its visible outline with the form before moving to the darker outer layers.
00:32–00:44 · Trim and fold the black back layer
A black sheet is cut and folded for the rear layer. Follow where the fold sits against the form; the clip does not establish an exact sheet dimension or a universal cutting angle.
00:44–00:52 · Set the black layer behind the print
The prepared black layer is placed behind the printed sheet. Check which printed edges remain visible so the back does not disappear behind the black outline.
00:52–01:10 · Cut and fold a rolled side panel
Cut and fold the side piece while comparing it with your form. Watch the open rolled edge and the lower fold separately, then bring them together into the curved side profile.
01:10–01:26 · Set the side layers below the grip
Bring the side pieces around the form below the grip. Compare their left and right placement while leaving room for the front layer; adjust the overlap to the form you are using.
01:26–01:40 · Fold the S-shaped front layer
A further black piece is folded into an S-shaped front detail. Follow the direction of the folds and compare the open edge with the side rolls before positioning it.
01:40–01:50 · Pinch and position the front folds
Pinch the front folds and compare them against the existing layers. Keep track of the lower gathering point and the amount of the printed panel still visible above it.
01:50–02:04 · Add a smaller folded finishing piece
Add the smaller folded front piece and check how it covers the lower join. Keep the upper opening clear and compare the overlap before fastening.
02:04–end · Finish with black ribbon and compare the shell
The final black-ribbon action is brief. Compare the ribbon position and finished outline, but do not treat these last seconds as a complete bow-tying lesson. No flowers are inserted in the demonstration.

Request materials for this look
The exact paper and ribbon SKUs are not identified. Surface appearance alone does not establish composition, water resistance or suitability for a particular flower-care method.
Copy the reference below into the wholesale enquiry form, with your preferred colours, quantity and destination.
Reference: 2026-10-26-011 — How to Make a Black Bouquet Shell with Rolled Layers.
Black wrapping sheets suitable for rolled and S-shaped folds; a purple floral-print back panel; black-and-white patterned lining; and coordinating black ribbon. Please confirm composition, sheet dimensions, ribbon width, selling units, pack quantities and a sample for handling. I need [quantity] for [destination], in [preferred colours]. Reference video: https://www.youtube.com/shorts/Ov2sfJnYtS4
Confirm the selected options, sample, price, availability and freight through the quotation. This guide does not promise a same-model match or current stock.
Floral demonstration shared with permission. Guide by FAFAFLOWER.
Music: “Paper Wings” by Jason Shaw / Audionautix, CC BY 4.0. Changes: excerpt, fades and level adjustment.